Use this property to set the session connection options at runtime.
HostConnection.sessionOptions
Arguments
HostConnection
Required. HostConnection object.
Remarks
READWRITE.
For example, to set the ScreenCheck properties which identifies the initial host screen, do the following:
oConn.sessionOptions = "ConnectTestRow:23;ConnectTestColumn:2;ConnectTestText:ENTER;"
The following table shows the session options available:
Setting |
Example Values |
Comment |
Protocol |
TN3270, TN5250, TNVT |
|
TerminalType |
IBM-3278-2 (24 x 80) IBM-3278-2E (24 x 80) IBM-3278-3 (32 x 80) IBM-3278-3E (32 x 80) IBM-3278-4 (43 x 80) IBM-3278-4E (43 x 80) IBM-3278-5 (27 x 132) IBM-3278-5E (27 x 132) IBM-5251-11 (24 x 80 mono) IBM-3179-2 (24 x 80 color) IBM-3196-A1 (24 x 80 mono) IBM-5292-1 (24 x 80 color) IBM-5291-1 (24 x 80 mono) IBM-3180-2 (27 x 132 mono) IBM-3477-FG (27 x 132 mono) IBM-3477-FC (27 x 132 color) DEC-VT100, DEC-VT220, DEC-VT320 |
Type depends on the protocol selected. |
Address |
IP (e.g. 192.168.0.1) or hostname (e.g. localhost) |
|
CodePageTable |
CP037.dat |
Code page to use for this session |
ReadySilence |
100 |
|
TNLevel |
0, 1, 2 |
0=TN3270 1=TN3270E (Basic) 2=TN3270E (Full) |
ConnectTestColumn |
1 |
|
ConnectTestRow |
24 |
|
ConnectTestText |
login |
|
ConnectSilentCount |
20 |
|
ConnectTimeoutCount |
300 |
|
hostName |
Insure |
hostname to connect to, or use the sessionHost property |
luName |
SYS0002 |
For iSeries Device Name (DEVNAME) or TN3270E LU Name, use this setting, which can include wildcards for sessionID--see description in the Administration Guide-- |
NewSession |
Yes, No |
For pooled sessions, set to yes to ensure an unused session is connected on next Connect(). |
pool |
base |
For pooled sessions, name of pool to connect to (or use sessionPool property) |
port |
23 |
Telnet port to connect to, or use the sessionPort property |
ScreenRowsNorm |
24 |
|
ScreenColsNorm |
80 |
|
ScreenRowsAlt |
27 |
|
ScreenColsAlt |
132 |
|
Host sends zero-length buffers |
0 |
|
IgnoreHostDrop |
No |
|
TransitionTimeout |
20000 |
|
termRowCutoff |
0 |
|
The following example illustrates session connection options being set and the connection method being executed:
HostConnection oConn = new HostConnection();
oConn.sessionHost = "127.0.0.1";
oConn.sessionPort = 23;
oConn.sessionOptions = "ConnectTestRow:23;ConnectTestColumn:2;ConnectTestText:ENTER;";
oConn.sessionType = "TN3270";
oConn.connect("standard");
Requirements
Inventu Viewer+
See Also
Connect | sessionHost | sessionPort | sessionType
Applies To: HostConnection object
© 2022 Inventu Corporation
